[1] Zhou X, Xia H, Zhang J(*), et al, Effect of ECAP temperature and deformation route on mechanical properties of pre-extruded Mg-5Gd-3Y-1Zn-0.5Zr alloys, Journal of Materials Science & Technology, 2025, 212: 237-250. [2] Zhang R, Zhou X(*), Li M, et al. Effect of Zn Content and Homogenization Treatment on Mechanical Properties and Corrosion Behavior of Mg-9Y-xZn Alloys, Metals and Materials International, 2025, 31: 770-786. [3] Liu L, Zhou X(*), Yu S, et al, Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation, Journal of Magnesium & Alloys, 2022, 10(2): 501-512. [4] Yang X, Zhou X(*), Yu S, et al, Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion, Materials Science & Engineering: A, 2022, 851: 143634. [5] Zhou X, Yang X, Lu X(*), et al, Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y–1Zn-0.5Zr alloy, Materials Science & Engineering: A, 2022, 857: 144115. [6] Lu X, Zou X, Zhou X(*), et al, Tunable mechanical and degradation properties of biodegradable Mg–Y–Zn alloys via Zn content regulation, Journal of Materials Research & Technology, 2022, 20: 3173-3184. [7] Zhou X, Yao Y, Zhang J(*), et al, A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior, Journal of Materials Science & Technology, 2021, 70: 56-167. [8] Zhou X(*), Xiong W, Zeng G, et al, Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy, Materials Science & Engineering: A, 2021, 805: 140596. [9] Zhou X, Yao Y, Zhang J(*), et al, Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases, Materials Science & Engineering: A, 2020, 794: 139934. [10] Zhou X, Zhang J(*), Chen X, et al, Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment, Journal of Alloys & Compounds, 2019, 787: 551-559. 其它论文请见:https://www.researchgate.net/profile/Xiaojie-Zhou-15 |